product overview

ABB 500CIM05 1MRB150077R1/B is a high-performance communication interface module designed specifically for industrial fieldbus communication in ABB 500 series automation systems. This module serves as a key communication hub for industrial control systems, supporting multiple industrial protocols to ensure efficient and reliable data exchange between devices.
Product identification information
Main model: 500CIM05
Complete order number: 1MRB150077R1/B
Product series: ABB 500 series communication module
Manufacturer: ABB Group
Product Type: Industrial Communication Interface Module
Detailed technical specifications
Communication performance parameters
Support agreement:
PROFIBUS DP (compliant with IEC 61158 standard)
Modbus RTU/TCP
Optional PROFINET IO support (specific firmware required)
Communication speed:
PROFIBUS: Adaptive from 9.6Kbps to 12Mbps
Modbus TCP: 10/100Mbps adaptive
Interface configuration:
1 x PROFIBUS DP interface (9-pin D-sub)
1 x RJ45 Ethernet interface
1 × RS-485 interface (terminal block)
Electrical and mechanical parameters
Power specifications:
Working voltage: 24VDC ± 10%
Power consumption: typical value of 4.5W, maximum value of 6W
Isolation voltage: 1500VAC
Physical characteristics:
Size: 115mm × 75mm × 40mm
Weight: Approximately 280g
Installation method: 35mm DIN rail installation
Environmental parameters:
Working temperature: -25 ° C to+60 ° C
Storage temperature: -40 ° C to+85 ° C
Relative humidity: 5-95% without condensation
Protection level: IP20 (for control cabinet installation)

Core functional advantages
1. Multi protocol compatibility
Automatic protocol recognition and switching
Support master/slave mode configuration
Protocol conversion function (requires software configuration)
2. Industrial grade reliability
Built in dual watchdog design
Automatic recovery of communication errors
Anti interference design (compliant with EN 61000-6-2/4)
3. Intelligent diagnostic function
Real time communication quality monitoring
Error code records (up to 100 entries)
LED status indicator light (power/communication/error)
4. Convenient configuration management
Web configuration interface (Ethernet access)
Parameter import/export function
Support remote firmware upgrade
Typical application scenarios
Industrial automation system
PLC and on-site equipment communication gateway
Remote I/O connection of DCS system
Networking of production line equipment
Energy Management System
Substation communication subsystem
Distribution network data collection
Integration of energy monitoring system
Process control application
Petrochemical DCS communication
SCADA system for water treatment
Process monitoring in pharmaceutical factories
Installation and Configuration Guide
Hardware installation steps
Disconnect the system power supply
Insert the module into the DIN rail
Connect 24VDC power supply (pay attention to polarity)
Connecting communication cables:
PROFIBUS: Using shielded twisted pair cables
Ethernet: Standard CAT5e and above
Check the reliability of all connections
Software configuration process
Connect modules through Ethernet or configuration tools
Set communication parameters (baud rate/station address, etc.)
Configure protocol conversion rules (if necessary)
Download configuration to module
Verify communication status
Diagnosis and Maintenance
Description of status indicator lights
Meaning of indicator light color and status
PWR green constant light power supply is normal
COM1 yellow flashing PROFIBUS communication in progress
COM2 blue constant light Ethernet connection established
ERR red flashing communication fault
Common troubleshooting
Communication interruption:
Check the terminal resistance setting (PROFIBUS)
Verify network physical connections
Confirm that there is no conflict in the station address
Module not recognized:
Check the power supply voltage
Reset module (using reset button)
Update firmware version
Data transmission error:
Check the grounding of the cable shielding layer
Reduce communication baud rate test
Check EMC environment

1)100% full New! – Original Factory Seal !

2)Warranty: 12 months!

3)Package: Original packing with cartons.

4)Delivery time: Shipped in 3 days after payment

5)Payment Terms: TT, Pay pal & Western Union

6)DHL/TNT/UPS/EMS/Fedex

Brand: FOXBORO

Item NO.: FBM03

Payment: T/T, Western Union, Paypal

Product Origin: American

Shipping Port: XIAMEN, CHINA

Lead Time: IN STOCK

Condition: 100% full New !Original Factory Seal !