Product Overview

The ABB 500CSP04 HE401314/0002 (1MRB150051R2) is a high-performance communication synchronization processor module from ABB’s 500 series automation platform. Designed for mission-critical industrial applications, this advanced module ensures precise timing synchronization across distributed control systems while providing robust communication gateway functionality.

Product Identification

• Model Number: 500CSP04
• Alternative Part Number: HE401314/0002
• Order Code: 1MRB150051R2
• Product Line: ABB 500 Series
• Manufacturer: ABB Industrial Automation
• Device Type: Industrial Communication Synchronization Processor

Technical Specifications

Synchronization Features

• Precision Timing:
  • IEEE 1588v2 (PTP) Precision Time Protocol
  • Synchronization accuracy: <100ns
  • Supports grandmaster/transparent clock modes
• Redundancy:
  • Dual-redundant synchronization paths
  • Automatic failover (<50ms switchover)
  • Hot standby capability

Communication Interfaces

• Network Ports:
  • 4× Gigabit Ethernet (copper/fiber optional)
  • 2× PROFIBUS DP (isolated)
  • 1× RS-485 (synchronization bus)
• Protocol Support:
  • PROFINET IRT/RT
  • EtherNet/IP
  • OPC UA Pub/Sub
  • IEC 61850 (Edition 2)

Performance Parameters

• Processing Power:
  • Dual-core ARM Cortex-R5 @800MHz
  • 512MB DDR4 RAM
  • 32MB NOR Flash
• Electrical Characteristics:
  • Power Supply: 24VDC (18-36V range)
  • Typical Consumption: 12W
  • Isolation: 2500VAC (port-to-port)

Environmental Ratings

• Operating Conditions:
  • Temperature: -40°C to +70°C
  • Relative Humidity: 5-95% non-condensing
  • Altitude: Up to 3000m
• Mechanical:
  • Dimensions: 150mm × 110mm × 55mm
  • Weight: 750g
  • Mounting: DIN rail (35mm) or panel

Key Features

1. Precision Synchronization

• Nanosecond-level clock synchronization
• Multi-domain timing support
• Automatic clock hierarchy management

2. Industrial Cybersecurity

• Secure boot with hardware root of trust
• TLS 1.3 encryption
• Role-based access control (RBAC)

3. High Availability

• Redundant power inputs
• Dual firmware images
• Online firmware update

4. Advanced Diagnostics

• Real-time network monitoring
• Jitter/latency measurement
• Predictive failure analysis

Typical Applications

Power Systems

• Substation automation
• Phasor measurement units (PMUs)
• Wide-area monitoring systems

Industrial Networks

• Motion control systems
• Distributed I/O synchronization
• Multi-controller coordination

Transportation

• Railway signaling systems
• Airport baggage handling
• Port automation

Installation Guide

Hardware Setup

1. Mounting:
   • Ensure proper clearance (50mm minimum above/below)
   • Use DIN rail clip (included) or M4 screws
2. Wiring:
   • Connect redundant power supplies
   • Terminate synchronization bus properly
   • Use shielded cables for all signals
3. Grounding:
   • Single-point grounding recommended
   • Ground wire minimum 4mm²

Software Configuration

1. Initial Setup:
   • Access web interface (default IP: 192.168.1.100)
   • Set device identity parameters
2. Synchronization:
   • Configure PTP domain parameters
   • Select clock hierarchy
   • Set synchronization intervals
3. Network:
   • Configure VLANs and QoS
   • Set up protocol mappings
   • Enable security features

Maintenance & Diagnostics

Status Indicators

Common Issues & Solutions

Synchronization Loss:

• Verify network path delays
• Check for asymmetric routing
• Validate grandmaster clock stability

Communication Drops:

• Inspect cable integrity
• Check for EMI sources
• Verify switch port configurations

High CPU Usage:

• Reduce protocol stack load
• Optimize synchronization rate
• Consider network segmentation

Ordering Information

Standard Package Includes:

• 500CSP04 processor unit
• DIN rail mounting kit
• Quick start guide (multilingual)
• Compliance documentation

Optional Accessories:

• Fiber optic transceiver kit (1MRB150051A201)
• Redundant power module (1MRB150051A202)
• Configuration backup tool (1MRB150051A203)

Certifications & Compliance

• IEC 61850-3 (Power)
• IEEE 1613 (Electric Utility)
• EN 50121-4 (Railway EMC)
• UL 61800-5-1 (Safety)
• RoHS 3 & REACH compliant

Technical Support

ABB provides for 500CSP04:

• 24/7 critical support hotline
• Online knowledge base access
• Firmware update portal
• Application engineering services
• On-site training programs

For purchasing or technical assistance, contact your local ABB representative or visit ABB Automation Products. Genuine ABB components ensure system reliability and full warranty coverage.

1)100% full New! – Original Factory Seal !

2)Warranty: 12 months!

3)Package: Original packing with cartons.

4)Delivery time: Shipped in 3 days after payment

5)Payment Terms: TT, Pay pal & Western Union

6)DHL/TNT/UPS/EMS/Fedex

Brand: FOXBORO

Item NO.: FBM03

Payment: T/T, Western Union, Paypal

Product Origin: American

Shipping Port: XIAMEN, CHINA

Lead Time: IN STOCK

Condition: 100% full New !Original Factory Seal !