product overview
ABB 500BOM01 1MRB150023R0002 is a professional digital output module in the ABB 500 series automation system, designed specifically for industrial control applications. This module provides reliable switch output function, suitable for equipment control requirements in various industrial automation scenarios.
Product identification information
Main model: 500BOM01
Complete order number: 1MRB150023R0002
Product Series: ABB 500 Series I/O Modules
Manufacturer: ABB Automation
Product Type: Digital Output Module (DO)
Detailed technical specifications
Electrical parameters
Power specifications:
Working voltage: 24VDC ± 10%
Power consumption: Maximum 6.5W
Reverse polarity protection: built-in
Output channel:
Number of channels: 16 independent outputs
Output type: transistor output (source type)
Load capacity: 0.5A per channel
Total load capacity: 4A (sum of all channels)
Output voltage range: 0-30VDC
Leakage current:<0.1mA
Mechanical and environmental parameters
Physical dimensions: 110mm x 75mm x 35mm (width x height x depth)
Weight: Approximately 320g
Installation method: 35mm standard DIN rail installation
Working temperature: -25 ° C to+60 ° C
Storage temperature: -40 ° C to+85 ° C
Relative humidity: 5-95% without condensation
Protection level: IP20 (to be installed inside the control cabinet)
Vibration resistance: 5-9Hz/9-150Hz (compliant with IEC 60068-2-6)

Core functional features
High performance output:
Switching frequency up to 1kHz
Response time<1ms
Low on resistance (<0.5 Ω)
Multiple protection design:
Overcurrent protection (automatic cut-off and alarm)
Short circuit protection
Over Temperature Protection
reverse polarity protection
Intelligent diagnostic function:
Independent status LED indication for each channel
Module health status monitoring
Automatic isolation of fault channels
Flexible configuration:
Support group control (8 groups x 2 channels)
Configurable output to maintain state
Compatible with multiple types of loads
Typical application scenarios
industrial automation control
Electromagnetic valve control
relay drive
Motor start stop control
Indicator light control
process automation
Pump control
Compressor Control
heater control
Alarm device driver
mechanical equipment
Control of packaging machinery actuators
Conveyor belt motor control
Machine tool auxiliary equipment control
Robot peripheral device control
Installation and Wiring Guide
Installation steps
Confirm that the system power has been disconnected
Insert the module into the DIN rail until it locks in place
Connect 24VDC power supply (pay attention to polarity)
Connect the output load line
Check if all wiring is secure
Wiring diagram
text
+24VDC – [PWR+] – Module – [COM] – Load – GND
precautions
Use wires with a cross-sectional area of 0.5-2.5mm ²
Inductive loads require parallel freewheeling diodes
It is recommended to use intermediate relays for high current loads
Diagnosis and Maintenance
Description of status indicator lights
Meaning of indicator light color and status
PWR green constant light power supply is normal
RUN green flashing module is running
ERR red constant light module fault
CHx yellow constant bright channel activation
Common fault handling
Output unresponsive:
Check the power supply voltage
Confirm that the load wiring is correct
Check the channel enable status
Module overheating:
Check the ambient temperature
Confirm that the load current does not exceed the limit
Improve heat dissipation conditions
Individual channel malfunction:
Check if the load is short circuited
Replace the backup channel
Contact Technical Support
ordering information
Standard configuration
500BOM01 module body x 1
Installation manual x 1
Product Qualification Certificate x 1
Warranty card x 1
Options
Output protection module (order number: 1MRB150023A001)
Terminal adapter board (order number: 1MRB150023A002)
DIN rail installation kit (order number: 1MRB150023A003)

1)100% full New! – Original Factory Seal !

2)Warranty: 12 months!

3)Package: Original packing with cartons.

4)Delivery time: Shipped in 3 days after payment

5)Payment Terms: TT, Pay pal & Western Union

6)DHL/TNT/UPS/EMS/Fedex

Brand: FOXBORO

Item NO.: FBM03

Payment: T/T, Western Union, Paypal

Product Origin: American

Shipping Port: XIAMEN, CHINA

Lead Time: IN STOCK

Condition: 100% full New !Original Factory Seal !